-
-
Physical and chemical properties of vermiculite The chemical composition of vermiculite Composition SiO2 Al2O3 Fe2O3 FeO MgO TiO2 K2O H2O Content ( % 37-45 8-18 3-10 1-3 10-22 1-1.5 2-8 10-21 Physical and chemical properties Specific gravityg / cm3 Expanded vermiculite bulk weight kg / m3 PH value Hardness Refractory melting point Refractive index 2.2-2.6 80-200 6.28 1.3-1.6 1300-1370 1.52-1.65 Uses of vermiculite Used for thermal insulation Expanded vermiculite has the charac... -
product description Many of its properties are superior to natural mica , such as temperature resistance up to 1200 ℃ , under high temperature conditions, the volume resistivity of synthetic fluorophlogopite is 1000 times higher than natural mica , good electrical insulation, very low vacuum outgassing and acid, transparent, can be divided into stripping and elastic and other characteristics , is a modern and high-tech industrial motors, electrical appliances, electronics, aviation and o... -
Product description Light specific gravity and large volume. The density of hollow glass beads is about one tenth of that of traditional fillers. After filling, it can greatly reduce the base weight of products, replace and save more production resins and reduce the cost of products. With organic modified (lipophilic) surface. Hollow glass beads can be easily wetted and dispersed, and can be filled in most thermosetting thermoplastic resins, such as polyester, epoxy resin, polyurethane, etc. ... -
Product description Dehydrated mica has many special properties and is widely used in many fields because its water content is about 10 times lower than that of ordinary mica. In industry, it is mainly used as insulating material for electrical equipment and electrical equipment by its high electrical insulation and heat resistance, as well as its strong acid, alkali, compression and peeling properties. It is mainly used in the fields of electricity, national defense, building materials,... -
Product description Filled glass beads are divided into solid glass beads and hollow glass beads. Glass beads are small spheres with high ball shape ratio, ball bearing effect and very good fluidity. Filling in coatings and resins can improve the fluidity of materials, reduce viscosity, make materials easy to level, increase external hardness and toughness, and improve product quality. Hollow glass beads have the characteristics of high resistivity, low thermal conductivity and small thermal ... -
product description Its application is to produce all kinds of mica paper, insulating materials, electrical industry, mica powder, linoleum, oil drilling and new mica building materials. It is effective to make drilling mud, plug pores and fractures, prevent mud leakage, increase mud adhesion on hole wall and block weak permeable formation. The utility model has the advantages of lubrication, wear resistance, energy saving and prolonging the service life of drilling tools. Common specifi... -
product description They have good weather resistance and dispersibility. They can not only resist ultraviolet rays, but also have high temperature resistance. They can be mixed with most base materials such as acrylic resin, amino alkyd resin or nitrocellulose. They can be made into automobile, motorcycle and bicycle topcoats, furniture topcoats, electrical finishing coatings, architectural Satin decorative coatings and powder coatings. Mixing with transparent plastics such as polystyre... -
Product description Refer to the method of incubating eggs with sediment Egg placement and humidity control are similar to those of incubating eggs with sediment, but compared with incubating eggs with sediment, it has more advantages: 1. Because of its light weight and convenient operation, it is also convenient to check the development of eggs; 2. Because of its good thermal insulation performance, it is not easy to be affected by the outside world; 3. Because of its good moisturizing perfo... -
Product description Vermiculite board has excellent impact resistance, high strength and toughness. Good dimensional stability and weather resistance. Excellent resistance to mold and insects. Can be sawed, nailed, planed, drilled, easy to install and construct. Good sound insulation. Conventional 2400 * 1200 * 15-60mm ; maximum 2500 * 1220 * 100mm . Density of 400-600kg / M3 , also can refer bespoke Vermiculite board is widely used in construction, shipbuilding, metallurgy, electric power, a... -
Product description Physical and chemical indexes of sericite powder Dry silk mica Main physical indicators BaiDu(%) PH value Loss on ignition (%) Moisture (%) > 75 6-8 4-6 <0.8 Main chemical composition SiO 2 Al 2 O 3 K 2 O Fe 2 O 3 S, P 60-75 13-17 4-5 <1.8 0.02-0.03 Wet silk mica Main physical indicators BaiDu(%) Sand content (%) Attached water (%) PH value Loose density g / cm 3 > 80 <0.5 <0.... -
Product description Phlogopite is widely used in building materials industry, fire fighting industry, fire extinguishing agent, welding rod, plastic, electrical insulation, papermaking, asphalt paper, rubber, pearlescent pigment and other chemical industries. Superfine phlogopite powder can be used as a functional filler for plastics, coatings, paints, rubber, etc., which can improve its mechanical strength, toughness, adhesion, anti-aging and corrosion resistance. Phlogopite is divided ...
